Roast Architect can recognize different file types that are associated with Loring S-Series Roasters.  These are listed below.


v1 Support

Roast Architect only supports the viewing and conversion of v1 files into compatible v2 file formats. It does not allow for the editing and saving of these file types. 

v1 File Types

v1 Baseline File (*.csv) - Contains a v1 Roaster baseline. 

v1 Burner Recipe File (*.csv) - Contains a v1 Burner Recipe and usually a baseline**.

v1 Profile (Return Air) Recipe File (*.csv) -  Contains a v1 Profile curve and a baseline curve**.

v1 Email RST_DATA file (*.csv) - The emailed report log sent by the T100 based v1 Roaster.

v1 Products Files (*.csv) - The bean product names file used by a T100 based v1 Roaster. 

v1 Configuration Files (*.csv) - The configuration file saved by a v1 Roaster.

v2 File Types

v2 Baseline File (*.lrcp) - Contains a v2 Roaster baseline.

v2 Burner Recipe File (*.lrcp) - Contains a v2 Burner Recipe.

v2 Profile (Bean Temperature) Recipe File (*.lrcp) - Contains a v2 Profile curve

v2 Email RST_DATA file (*.csv) - The emailed report log sent by the iX based v2 Roaster.

v2 Products Files (*.lprd) - The bean product names file used by a iX based v2 Roaster.

v2 Configuration Files (*.lcfg) - The configuration files saved by a v2 Roaster.

v2 Configuration Patch Files (*.lcfp) - A configuration patch file used to merge with a v2 Configuration File.

PLC Binary Image *.DLI - Used in updating the Loring Roaster PLC program.

LZIP - Loring Roaster Backup - An zip file that contains an backup of an attached v2 Roaster configuration files, Products Files, and Roast Profile / recipe files.

v1 File Conversion

Roast Architect will open the following v1 based file types and allow them to be saved as a converted v2 equivalent. The list of allowable conversions is listed below. 

v1 Baseline File (*.csv) -> v2 Baseline File (*.lrcp) 

v1 Burner Recipe File (*.csv) -> v2 Burner Recipe File (*.lrcp) **

v1 Profile Recipe File (*.csv) -> v2 Roast Profile File (*.lrcp) **

v1 Products File (*.csv) -> v2 Products File (*.lrpd)

v1 Configuration File (*.csv) -> v2 Configuration Patch File (*.lcfp)

v1 Email RST_DATA file -> v2 Baseline or Profile File (*.lrcp)


** There are some v1 formats that do not have an associated baseline inside their files. The conversion process to v2 based files relies on the baseline curve to be present. If the curve is not located in the file, Roast Architect will attempt to notify you that it is not there. The rest of the Profile information will be converted with a generated sample roast curve for the baseline or Profile data.


PDF Files: